Pumping Depth (DTW)
Gallons Per Minute
The Stainless Steel Hurricane XL® pump is capable of pumping up to 150 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous purging of groundwater wells. Proactive's Stainless Steel Pumps are patented for their unique design (#7584785). Simple to use and extremely powerful!
The Stainless Steel Hurricane XL® is capable of pumping up to 150 feet from ground level to water level. Simply, connect the pump connector to the Low Flow with Power Booster 2.5 XL "LCD" Controller, then to a 12 volt battery, energizing the pump. Sound Simple? We think so.
For the harsh environments!
The Stainless Steel Hurricane XL® can operate under harsh conditions with higher turbidity.
The Stainless Steel Hurricane XL® has been installed in hundreds of remediation sites using pump and treat systems.
The Stainless Steel Hurricane XL® can also be used with solar panels for long term remediation sites!
Why choose the Stainless Steel Hurricane XL®?
Simple to use! Runs off any 12 volt DC batteries.
Low Flow Sample as low as 10 M/L per minute, from any depth, when using the Low Flow with Power Booster 2.5 XL "LCD" Controller and Non-Return Check Valve (Sold Seperately).
Easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 2.5 XL "LCD" Controller makes adjusting and reading the discharge rate a breeze!
Computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity.
Long lasting, high performance pump motor lasts over 400 hours under normal working conditions.
Simple to clean and decontaminate!
The Stainless Steel Hurricane XL® is only 1.82" OD and constructed of three high polished stainless steel parts:
- The replaceable motor module
- The motor housing top connector
- The outside pump housing
Should the motor fail, the field technician can change out the Stainless Steel Hurricane XL® motor in less than 30 seconds! Tthe Stainless Steel Hurricane XL® comes complete with one additional motor module.
The main wear out parts consisting of the motor and seal all have been incorporated in a single replaceable motor module. Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 30 seconds by a simple quarter turn twist! Once installed, your pump is essentially new and will have a life span identical to a
Low Flow With Power Booster 2.5 XL "LCD" Controller
This Controller is specifically engineered for the Stainless Steel Hurricane XL®. The Low Flow with Power Booster 2.5 XL "LCD" Controller is constructed of a heavy duty steel casing. For added safety, this controller is engineered with a reverse polarity protection circuitry that incorporates a 30 amp fuse to protect the Controller and user.
The controller is also protected with a current limitation circuitry and thermal overload protection. Easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 2.5 XL "LCD" Controller makes adjusting and reading the discharge rate a breeze!
And, with the Low Flow With Power Booster 2.5 XL "LCD" Controller, the Field Technician can control the water discharge all the way down to 10 M/L per minute from 150 feet or less with the low flow control valve.
POWER CONSUMPTION: 920 WATTS (MAX) VOLT RECOMMENDATION: 12-15 At Source MAXIMUM AMP OUTPUT: 36 AMPS MEASUREMENTS:
LENGTH 7.5 " / DIAMETER: 1.82"
HIGH POLISH STAINLESS STEEL
3/8" ID POLY TUBING CAN BE USED
160 FEET OF HEAVY DUTY 10 GAUGE WIRE, ADDITIONAL MOTOR MODULE, DISPOSABLE LOW FLOW CONTROL VALVE, AND WRENCH