Stainless Steel Mega-Monsoon Pro® DTW 180ft Rental

 

Pumping Depth (DTW)
Gallons Per Minute
10 3.25
20 2.75
40 2.65
50 2.50
70 2.25
80 2.20
90 2.00
100 1.75
120 1.50
140 1.25
150 1.00
180 0.25
   

 

 

 

 

 

The SS Mega-Monsoon Pro® pump is capable of pumping up to 180 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous purging of groundwater wells. Proactive's Stainless Steel Pumps are patented for their unique design (#7584785). Simple to use and extremely powerful!

The SS Mega-Monsoon Pro® is capable of pumping up to 180 feet from ground level to water level. Simply, connect the pump connector to the All In One Pro Controller, then to a 12 volt battery, energizing the pump. Sound Simple? We think so.

For the harsh environments!

The SS Mega-Monsoon Pro® can operate under harsh conditions with higher turbidity.

The SS Mega-Monsoon Pro® has been installed in hundreds of remediation sites using pump and treat systems.

The SS Mega-Monsoon Pro® can also be used with solar panels for long term remediation sites!

Why choose the SS Mega-Monsoon Pro®?

Simple to use! Runs off any 12 volt DC batteries.

Lifts up to 180 feet deep from ground level to water level!

Reliable design is suitable for continuous purging of groundwater wells.

Low Flow Sample as low as 10 M/L per minute, from any depth, when using the All In One Pro Controller and Non-Return Check Valve (Sold Seperately).

Easy to read LCD display conveniently placed on top of the All In One Pro Controller makes adjusting and reading the discharge rate a breeze!

Computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity.

Long lasting, high performance pump motor lasts over 400 hours under normal working conditions.

Simple to clean and decontaminate!

The SS Mega-Monsoon Pro® is only 1.82" OD and constructed of three high polished stainless steel parts:

  1. The replaceable motor module
  2. The motor housing top connector
  3. The outside pump housing

SS Mega-Monsoon Pro® "30 Second Change Out Motor Design!" - A Great Value!

 

Should the motor fail, the field technician can change out the SS Mega-Monsoon Pro® motor in less than 30 seconds! The SS Mega-Monsoon Pro® comes complete with one additional motor module.

The main wear out parts consisting of the motor and seal all have been incorporated in a single replaceable motor module. Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 30 seconds by a simple quarter turn twist! Once installed, your pump is essentially new and will have a life span identical to a
new pump.

All In One Pro Controller

This Controller is specifically engineered for the SS Mega-Monsoon Pro®®. The All In One Pro Controller is constructed of a heavy duty steel casing. For added safety, this controller is engineered with a reverse polarity Pro®tection circuitry that incorporates a 30 amp fuse to Pro®tect the Controller and user.

The controller is also Pro®tected with a current limitation circuitry and thermal overload Pro®tection. Easy to read LCD display conveniently placed on top of the All In One Pro Controller makes adjusting and reading the discharge rate a breeze!

And, with the All In One Pro Controller, the Field Technician can control the water discharge all the way down to 10 M/L per minute from 180 feet or less when used with the low flow control valve.

Specifications

  • POWER CONSUMPTION: 1100 WATTS (MAX)
    VOLT RECOMMENDATION: 12-15 At Source
    MAXIMUM AMP OUTPUT: 39 AMPS
    MEASUREMENTS:

    LENGTH 7.5" / DIAMETER: 1.82"

    CONSTRUCTED:

    HIGH POLISH STAINLESS STEEL

    REQUIRED TUBING:

    3/8" ID POLY TUBING, TEFLON WIRE OPTIONAL

    SUPPLIED WITH:

    190 FEET OF HEAVY DUTY 10 GAUGE PVC WIRE NEATLY ROLLED UP ON A TUBULAR METAL REEL WITH PUMP HOLDER, 2 MOTOR MODULES, DISPOSABLE LOW FLOW CONTROL VALVE, AND WRENCH

0.0/5 rating (0 votes)

Share this product